Road Barriers
HQRB2020L road blocker
- Name: road blocker
- Mode: HQRB2020L
- Material: medium carbon steel with anti-corrosive paint
- Material Thickness: 16mm
- Product description: road blocker
HQRB2020L is a high quality road blocker which is widely used for protect high security areas from vehicle intruding. It’s an ideal solution for entrance with high-security needs. The lifting time of HQRB2020H is 1~5 seconds adjustment and the blocking height is 500 mm when it is rising completely. Even if the intrusion is from high tonnage vehicle in high speed, the road blocker will stop the vehicle easily because it is so solid that vehicle will break after impact instead.
There are also some extra safety precaution bar on the road blocker can effectively avoid accidents caused by poor vision of where traffic guidance is needed to protect people and property. This products in the design of HQRB2020L. The LED drivers at night. In case of power failure, the road blocker can rise and fall manually with hand pump. Equipped with PLC (Programmable Logic Controller), various control methods can be achieved easily, such as wireless remote control and push button station.
The road blocker is commonly found in customs, ports, prisons and military bases provides ideal access control in areas mentioned above and raises the level of security.
|
Highlights |
l Adopted hydraulic drive unit, lifting smoothly and quietly.
l Equipped with LED bar.
l Solid structure make sure high weight load.
l Extra ports to support variety of control methods.
l In case of power failure, it can manual lifting the road blocker.
|
Characteristics |
||
|
Material: |
|
medium carbon steel with anti-corrosive paint |
|
Finish Color: |
|
black, green, red optional |
|
Material Thickness: |
|
16mm |
|
Drive unit: |
|
hydraulic |
|
Spike: |
|
tapered, hardened steel |
|
Interception Panel: |
|
whole board cut |
|
Intercepting Panel Support: |
|
beams and frame structural support |
|
Caution: |
|
3M diamond reflective film |
|
Caution Light: |
|
acrylic protection, LED waterproof lights |
|
Raising Height: |
|
500mm |
|
Rise Time: |
|
1~5s (adjustment) |
|
Fall Time: |
|
1~5s (adjustment) |
|
Drainage Design: |
|
full drainage without bottom plate |
|
Weight Load: |
|
Less than 120T container truck can pass through |
|
Double Anti-rust Treatment: |
|
Steel structure metal primer + acrylic metal paint (ship paint) |
|
Power Equipment: |
|
heavy industry grade - linear reciprocating motion hydraulic cylinder (selected cylinder based on panel weight calculation) |
|
Power Transmission System: |
|
the hydraulic cylinder body is equipped with lifting end buffer device |
|
Protection Grade: |
|
IP68 |
|
Length: |
|
3000mm (standard) customer-specific adaptations |
|
Width: |
|
1000mm |
|
Height: |
|
760mm |
|
Weight: |
|
>1.3T |
|
Working Temperature: |
|
According to different hydraulic oil selection |
|
Mechanism Mode: |
|
Vertical |
|
Motor: |
|
3HP*4, Three-phase 380VAC (industrial grade) |
|
Power: |
|
3.7KW |
|
Cooling Mode: |
|
Naturally cooled structure |
|
Working Temperature: |
|
-35°C -75°C |
|
Solenoid Valve Assembly: |
|
solenoid reversing valve, solenoid overflow valve, pressure reducing valve, speed regulating valve |
|
Oil Tank Capacity: |
|
About 60L |
|
Hydraulic Tube: |
|
PT international standard interface, 1/2 dual steel wire high pressure tube |
|
Emergency: |
|
Support backup manual up and down |
|
Double Acting Double Oil Manual Pump: |
|
2.3ml/time (industrial grade) |
